项目

一般

简介

行为

图片优化 #45692

已关闭

制作覆膜机进门和组装说明图

王丽超过一年 之前添加. 更新于 11 个月 之前.

状态:
已完成
优先级:
立刻
指派给:
开始日期:
2022-09-27
计划完成日期:
% 完成:

0%

预期时间:
得分:
所属类目-类目组:
雕刻
图片数量:
2

描述

请美工用附件中的图片做页面图,SIC和US站的1020两个尺寸:
一、参考图中红色机器换成附件中的覆膜机,将覆膜机添加图片上的表情,做的卡通一些
二、图片中文字内容如下:
Delivery Size Description
You are too widel Cannot enter!
The door is too narrow for entry.
1. The door is smaller than the outer packaging of the machine, and the width of the box is too big.
That’s it you come in quickly!
2. He machine can be simply assembled in the open space and then pushed into the room.
Cannot enter the corridor.
3. If it is above the second floor, use a crane to lift the machine upstairs.
I need proper apace to firish my work!
Reserve space for placing the machine.
4. In order to ensure the normal operation of the machine when it is working, and to facilitate the replacement of material later on. When placing the machine, a distance of about 100cm should be reserved for the left and right and the rear, and a distance of at least 200cm should be reserved for the front.

Note: When moving, it is recommended to use forklifts and cranes.

三、用附件中的安装图做另外一个页面图:SIC和US站1020宽的
1、图片中人抬的机器换成覆膜机1
2、图片底部写文字:
Caution:
Mount the Laminator on the assembled Stand and tighten the screws firmly.
Moving the Laminator requires at least four people, holding it on both sides. Be careful to avoid back strain and other injuries.


文件

覆膜机.jpg (134 KB) 覆膜机.jpg 王丽, 2022-09-27 10:19
参考图.jpg (665 KB) 参考图.jpg 王丽, 2022-09-27 10:19
安装图.jpg (41.3 KB) 安装图.jpg 王丽, 2022-09-27 10:45
覆膜机1.png (86.4 KB) 覆膜机1.png 王丽, 2022-09-27 10:47
安装图.jpg (122 KB) 安装图.jpg 史亮晴, 2022-10-24 16:07
覆膜机.jpg (156 KB) 覆膜机.jpg 史亮晴, 2022-10-24 16:07

付培举 更新于 超过一年 之前

  • 指派给付培举 变更为 史亮晴

史亮晴 更新于 超过一年 之前

图已附件
页面banner2

王丽 更新于 11 个月 之前

  • 主题制作4个覆膜机进门和组装说明图 变更为 制作覆膜机进门和组装说明图
  • 指派给王丽 变更为 杨娇

FMJ-1600-WA-PLUS-US、FMJ-1400-WA-PLUS-US、FMJ-1600-WA-PLUS-T-US、FMJ-1600-E-WARM-US、FMJ-1700-WA-PLUS-US、FMJ-1600-WA-PLUS-H-US、FMJ-1600-WA-PLUS-AU、FMJ-1600-WA-PLUS、FMJ-1600-WA-PLUS-H、FMJ-1400-WA-PLUS-AU、FMJ-1400-WA-PLUS
QOMOLANGMA BRAND STORY:上插入美工上传到附件的安装图

FMJ-1600-E-WARM-US 、FMJ-1600-E-WARM、FMJ-1600-E-WARM-AU页面描述中Process:下边的2个页面图删除

杨娇 更新于 11 个月 之前

  • 指派给杨娇 变更为 高永亮

高永亮 更新于 11 个月 之前

  • 状态已完成待测试 变更为 产品经理审核
  • 指派给高永亮 变更为 王丽

图片已调整
us站点已同步
已邮件通知各平台

王丽 更新于 11 个月 之前

  • 状态产品经理审核 变更为 已完成
行为

导出 Atom PDF